The AD PLASTIC 2 valve bottomer produces open mouth cross bottom sacks and cross bottom valve sacks made from multilayer PE films using hot air sealing technology. This new paste-free sealing technology is a modern and cost-effective next step to sacks that have been sealed with adhesives for decades. Doing away with adhesives means there is no longer the need to pre-treat the film surface and costs associated with handling the adhesives, namely storage, preparation, cleaning, and disposal, are completely eliminated.
Another advantage: products made on the AD PLASTIC 2 can easily be used as batch sacks as they can be fused without leaving any residue.
|Sack width||25 – 60 cm|
|Sack length||45 – 91 cm|
|Bottom width, valve sack||8 – 18 cm|
|Bottom centre distance||35 – 75 cm|
|Tube cut-off length||53 – 109 cm|
|Mechanical speed*||max. 120/min.|
*Actual production speed depending on film recipe and sack construction.
If you have any questions about this product please call us or contact us using the form below.